60-61
Stock Hood
zoom!
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM
hinge. Additional
hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Coremat® reinforced skin aids in
reduction of
print-thru. Installation Tips
Add a new scoop for as little as $50 w / purchase. |
62-63
Stock Hood
zoom!
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM
hinge. Additional
hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Coremat® reinforced skin aids in
reduction of
print-thru. Installation Tips
Add a new scoop for as little as $50 w / purchase. |
62-63 Front Fender
Heavy Duty Features:
- Smooth gray gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes and attaching points must be
opened for installation.
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders come
so complete.
- No lower stud provisions.
|
60-63 Trunk Lid
Race Weight Features:
- 90 edges on both sides help to maintain body
contours.
- Full perimeter bracing supports the entire outer
surface.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
|
 |
 |
60-63 Door
Race Weight Features:
- Detailed interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation. |
- Available in Light Weight
design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows required attached to inner
door frame. |
|
64-65
Stock Hood
zoom!
Heavy Duty Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM
hinge. Additional
hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Coremat® reinforced skin aids in
reduction of
print-thru. Installation Tips
Add a new scoop for as little as $50 w / purchase. |
64-65 Thunderbolt
Hood
zoom!
Heavy Duty Features:
- Styled after the original T-bolt 4" design.
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner frames - utilizes OEM
hinge. Additional
hold downs required.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Coremat® reinforced skin. Installation Tips
You
can add a ram air isolator plate during check out. |
64-65 Front Fender
Heavy Duty Features:
- Smooth gray gellcoat exterior finish..
- Fiberglass texture, Black lacquer inner finish.
- Hood Jam holes and attaching points must be
opened for installation.
- Mold flashing must be removed for finishing.
- No other reproduction fiberglass fenders come
so complete.
- No lower stud provisions.
|
64-65 Trunk Lid
Race Weight Features:
- 90 edges on both sides help to maintain body
contours.
- Full perimeter bracing supports the entire outer
surface.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
|
 |
 |
64-65 Door
Race Weight Features:
- Detailed interior panel.
- Will accept original handle, hinge & latching
mechanism.
- All holes come closed & must be opened for
installation.
|
- Available in Light Weight
design only.
- Strictly intended for Racing application only!
- Fully gellcoated inner & outer surface.
- Plastic windows required attached to inner
door
frame.
|
|
66-69 Stock Hood
Race Weight Features:
- 90 edges on both sides help to maintain fender
contours.
- Full perimeter inner bracing.
- Black lacquered fiberglass textured inner.
- Sandable gray gellcoated exterior finish.
- Reinforced skin aids in reduction of
print-thru. Installation Tips
Add a new scoop for as little as $50 w / purchase. |
 |
|
